Vertical Double Flush Box

Item No. TDL - VDFB
Vertical Double Flush Box

Specifications

SKU Code
TDL - VDFB
Brand
Trojan
Product Type
Accessories

Attachments

GSA sources product information from trusted manufacturers and uses AI to assist in curation. Errors may occur — please refer to product data sheets for accuracy. Spot an issue? Let us know.

Description

The Vertical Double Flush Box is used to enable the Trojan egress solution products to be mounted in a vertical format. It allows for the Press and Prox Rex units to be mounted above the Smart Em Rex and standard Em Rex units with the double vertical surround.

Specifications:
  •  The hole size is 220mm H x 58mm W and has four clips for securing to the plaster board wall.
  •  Includes the flush box, 4 fixing clips and screws
  • The flush box can be used to mark out the hole size to be cut in to the plaster board by using the four corner holes to mark the wall and * then draw a line between the to cut to. This makes the installation very easy.
Vertical Double Flush Box

Vertical Double Flush Box

Item No. TDL - VDFB

Specifications

SKU Code
TDL - VDFB
Brand
Trojan
Product Type
Accessories

Attachments

*GSA makes every effort to source accurate and detailed product descriptions and technical information from our trusted manufacturers. We also utilise AI to assist in curating this information. However, from time to time, inconsistencies or errors may occur. For the most accurate product specifications, please refer to the official product data sheets provided. If you spot an error, let us know so we can correct it. 

Description

The Vertical Double Flush Box is used to enable the Trojan egress solution products to be mounted in a vertical format. It allows for the Press and Prox Rex units to be mounted above the Smart Em Rex and standard Em Rex units with the double vertical surround.

Specifications:
  •  The hole size is 220mm H x 58mm W and has four clips for securing to the plaster board wall.
  •  Includes the flush box, 4 fixing clips and screws
  • The flush box can be used to mark out the hole size to be cut in to the plaster board by using the four corner holes to mark the wall and * then draw a line between the to cut to. This makes the installation very easy.